LFX4 TRAIN TECH LOG & CAMP FIRE LIGHTING EFFECT CONTROLLER.
This module adds a realistic fire effect enabling control by DCC or DC.
The LFX4 controls amber, yellow and red LED's to give a realistic flickering fire effect. The modules comes with 1 amber, 1 yellow and 1 red LED but you can connect up to 3 sets of 3 (9 LED's) in to one LFX.
Outside fires can be modelled using cotton wool, matchsticks etc or projected inside rooms of model buildings to simulate the flame effect.
LFX Lighting effects modules offer easy ways to add interesting lighting effects to your layouts and can all controlled by a standard 12V DC supply, 9 volt battery or DCC controller - bring your layout alive!
Very easy to connect using the screw terminals fitted - you wire the LEDS direct with no need for any extra resistors etc and with One-Touch DCC it sets up in seconds!
Note all of these modules only work with LED’s, not filament bulbs.
LED’s are cheaper alternatives to bulbs which almost last forever and now come in lots of colours and sizes.
LED's are 8.6mm high x 5mm diameter (5.9mm diameter at base)
25mm long sturdy wires for easy connection
Ideal for fitting in homemade models buildings.
Pack contains 1 Amber, 1 Yellow and 1 Red LED, LFX Module and Instructions
Add interesting lighting effects to your layout - brings it alive!
Uses standard LED's directly connected to the screw terminals - no extra resistors etc
Simple 2 wire connection to DCC, a standard 12v DC accessory output or a 9v battery.